GENERATOR > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE V-BANK COVER SUB-ASSEMBLY |
![]() |
Hold the front of the V-bank cover sub-assembly and raise it to disengage the 2 retainers on the front of the V-bank cover sub-assembly. Continue to raise the V-bank cover sub-assembly to disengage the retainer on the rear of the V-bank cover sub-assembly and remove the V-bank cover sub-assembly.
| 4. REMOVE RADIATOR ASSEMBLY |
| 5. REMOVE V-RIBBED BELT |
| 6. REMOVE GENERATOR ASSEMBLY |
![]() |
Remove the terminal cap.
Remove the nut and disconnect the wire harness from terminal B.
Disconnect the generator connector from the generator assembly.
Remove the bolt and disconnect the wire harness clamp.
![]() |
Remove the 2 bolts.
![]() |
Remove the 2 bolts and generator assembly.
Disconnect the wire harness clamp and remove the generator bracket.