Home › Audio/Visual/Telematics › PARK ASSIST / MONITORING › ULTRASONIC SENSOR (for Rear Side)

ULTRASONIC SENSOR (for Rear Side) > REMOVAL

for Preparation Click here



1. REMOVE REAR BUMPER ASSEMBLY
(Click here)


2. REMOVE ULTRASONIC SENSOR CLIP


    E228017E01
  1. Disconnect the connector.
    Text in Illustration 
    *A
    LH Side
    *B
    Other Side

  1. Disengage the clamp.



    E228018E01
  1. Disengage the 4 claws to remove the ultrasonic sensor clip.
    Text in Illustration 
    *A
    LH Side
    *B
    Other Side



3. REMOVE NO. 1 ULTRASONIC SENSOR


    E228019E01
  1. Disengage the 2 claws to remove the No. 1 ultrasonic sensor.
    Text in Illustration 
    *A
    LH Side
    *B
    Other Side



4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER


    E228020E01
  1. Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the rear bumper assembly.
    Text in Illustration 
    *A
    LH Side
    *B
    Other Side