FRONT SEAT ASSEMBLY (for TMMK Made Manual Seat) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT SEAT HEADREST ASSEMBLY |
| 4. REMOVE REAR OUTER SEAT TRACK BRACKET COVER |
Lift up the seat track adjusting handle and move the seat to the foremost position.
![]() |
Disengage the 2 claws and remove the rear outer seat track bracket cover.
| 5. REMOVE REAR INNER SEAT TRACK BRACKET COVER |
![]() |
Disengage the 2 claws and remove the rear inner seat track bracket cover.
| 6. REMOVE FRONT SEAT ASSEMBLY |
![]() |
Remove the 2 bolts on the rear side of the seat.
Lift up the seat track adjusting handle and move the seat to the rearmost position.
Remove the 2 bolts on the front side of the seat.
Disconnect each connector and clamp under the seat.
Lift up the seat track adjusting handle and move the seat to the center position. Then, operate the reclining adjuster release handle and move the seatback to the upright position.
Remove the front seat assembly.