Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING RESET SWITCH

TIRE PRESSURE WARNING RESET SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL TIRE PRESSURE WARNING RESET SWITCH
  1. Engage the 2 claws to install the tire pressure warning reset switch to the lower instrument panel sub-assembly.



2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
  1. Connect each connector.



    B284909
  1. Engage the glove compartment light as shown in the illustration.



    B280313
  1. Engage the guide and 2 clips.

  1. Install the lower instrument panel sub-assembly with the 5 screws <C> or <D>.



3. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
(Click here)


4. INSPECT TIRE PRESSURE WARNING SYSTEM
(Click here)


5. PERFORM INITIALIZATION
(Click here)