REAR SEAT ASSEMBLY > INSTALLATION |
| 1. INSTALL REAR SIDE SEATBACK ASSEMBLY RH |
Engage the hook.
Install the rear side seatback assembly RH with the 2 bolts.
Connect the connector.
Connect the rear seat outer belt to the rear seat shoulder belt guide.
| 2. INSTALL REAR SIDE SEATBACK ASSEMBLY LH |
Engage the hook.
Install the rear side seatback assembly LH with the 2 bolts.
Connect the connector.
Connect the rear seat outer belt to the rear seat shoulder belt guide.
| 3. INSTALL REAR SEATBACK ASSEMBLY RH |
Place the rear seatback assembly RH in the cabin.
Install the rear seatback assembly RH with the 2 bolts.
| 4. INSTALL REAR SEATBACK ASSEMBLY LH |
Place the rear seatback assembly LH in the cabin.
Install the rear seatback assembly LH with the 2 bolts.
| 5. INSTALL INNER LUGGAGE COMPARTMENT TRIM PAD |
Install the inner luggage compartment trim pad.
| 6. INSTALL REAR SEAT CUSHION LOCK HOOK |
![]() |
Engage the claw to install a new rear seat cushion lock hook.
| 7. INSTALL REAR SEAT CUSHION ASSEMBLY |
Place the rear seat cushion assembly in the cabin.
![]() |
Engage the 2 hooks of the seat cushion to the vehicle body as shown in the illustration.
Confirm that the seat cushion is firmly installed.
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 9. INSPECT SRS WARNING LIGHT |