FRONT SEATBACK HEATER > INSTALLATION |
| 1. INSTALL FRONT SEATBACK HEATER ASSEMBLY (for TMMK Made) |
Using a tacker, install the front seatback heater assembly to the separate type front seatback cover with 8 new tag pins.
| 2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER (for TMMK Made) |
![]() |
Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 2 new hog rings.
Engage the 2 fasteners.
| 3. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for TMMK Made) |
Temporarily install the separate type front seatback cover with pad.
Engage the 4 claws to install the 2 front seat headrest supports.
Engage the 2 hooks.
Slide each hook to engage them.
Install the 4 clips.
Engage the 2 fasteners.
Engage the hook.
| 4. CONNECT CONNECTORS (for TMMK Made) |
![]() |
Engage the claw (D) and 3 clamps (C) to install the front seat airbag assembly wire harness.
Engage the clamp (B).
Connect the connector (A).
Connect the connector (E).
Engage the clamp (F).
| 5. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for TMMK Made) |
Connect the 2 rubber bands of the separate type front seatback cover.
| 6. INSTALL FRONT SEAT ASSEMBLY (for TMMK Made) |
| 7. INSTALL FRONT SEATBACK HEATER ASSEMBLY (for SIA Made) |
Using a tacker, install the front seatback heater assembly to the separate type front seatback cover with 12 new tag pins.
| 8. INSTALL SEPARATE TYPE FRONT SEATBACK COVER (for SIA Made) |
![]() |
Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 6 new hog rings.
| 9. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for SIA Made) |
Temporarily install the separate type front seatback cover with pad.
Engage the 4 claws to install the 2 front seat headrest supports.
Install the 3 brackets with the 2 nuts.
![]() |
Turn back the separate type front seatback cover.
Using hog ring pliers, install the 2 new hog rings.
![]() |
Using hog ring pliers, install 3 new hog rings.
![]() |
Using hog ring pliers, install 5 new hog rings.
| 10. CONNECT CONNECTOR (for SIA Made) |
Engage the clamp.
Connect the connector.
| 11. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for SIA Made) |
Connect the rubber band of the separate type front seatback cover.
| 12. INSTALL FRONT SEAT ASSEMBLY (for SIA Made) |