FRONT SEAT CUSHION HEATER > REMOVAL |
| 1. REMOVE FRONT POWER SEAT SWITCH (for TMMK Made) |
| 2. REMOVE FRONT SEAT INNER CUSHION SHIELD (for TMMK Made) |
![]() |
Remove the 2 screws and front seat inner cushion shield.
| 3. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for TMMK Made) |
![]() |
Disconnect the connector (A).
Disengage the clamp (B).
Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.
w/ Seat Heater System:
Disconnect the connector (E).
Disengage the clamp (F).
for Driver Side:
![]() |
Separate the separate type front seat cushion cover.
for Front Passenger Side:
![]() |
Separate the separate type front seat cushion cover.
![]() |
Disengage the 4 hooks.
![]() |
Disengage each hook and remove the separate type front seat cushion cover with pad.
| 4. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (for TMMK Made) |
![]() |
Remove the 12 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.
| 5. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (for TMMK Made) |
![]() |
Remove the 20 tag pins and the front seat cushion heater assembly from the separate type front seat cushion cover.
| 6. REMOVE FRONT SEAT ASSEMBLY (for SIA Made) |
| 7. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (for SIA Made) |
![]() |
Disconnect the rubber band of the separate type front seatback cover.
| 8. REMOVE NO. 1 FRONT SEAT INNER CUSHION SHIELD (for SIA Made) |
![]() |
Remove the screw.
Disengage the 2 claws to remove the clip from the front No. 1 seat inner cushion shield as shown in the illustration.
![]() |
Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.
| 9. REMOVE FRONT SEAT CUSHION SHIELD (for SIA Made Driver Side) |
![]() |
Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.
![]() |
Disengage the 2 claws and open the wire harness cover.
| *1 | Wire Harness Cover |
Remove the wire harness from the wire harness cover.
Disengage the 2 wire harness clamps.
Disconnect the front power seat switch connector.
![]() |
Disconnect the front lumbar power seat switch connector.
| 10. REMOVE FRONT SEAT CUSHION SHIELD (for SIA Made Front Passenger Side) |
![]() |
Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.
![]() |
Disengage the 3 claws and open the wire harness cover.
| *1 | Wire Harness Cover |
Remove the wire harness from the wire harness cover.
Disengage the 2 wire harness clamps.
Disconnect the front power seat switch connector.
| 11. REMOVE FRONT SEAT INNER CUSHION SHIELD (for SIA Made Driver Side) |
![]() |
Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.
| 12. REMOVE FRONT SEAT INNER CUSHION SHIELD (for SIA Made Front Passenger Side) |
![]() |
Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.
| 13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for SIA Made) |
![]() |
Disengage the fastener and separate the front seat airbag assembly wire harness.
![]() |
Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.
w/ Seat Heater System:
![]() |
Disconnect the connector.
Disengage the clamp.
![]() |
Disconnect the connector.
Disengage the 2 clamps to separate the seat heater wire harness.
![]() |
Disengage the hook.
![]() |
Disengage each hook and remove the separate type front seat cushion cover with pad.
| 14. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (for SIA Made) |
![]() |
Remove the 2 hog rings.
![]() |
Remove the 16 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.
| 15. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (for SIA Made) |
![]() |
Remove the 34 tag pins and the front seat cushion heater assembly from the separate type front seat cushion cover.