STEERING PAD SWITCH (for 4 Spoke) > INSTALLATION |
| 1. INSTALL STEERING PAD SWITCH ASSEMBLY |
Engage the claw and 2 pins to install the steering pad switch assembly (RH side) to the steering wheel sub-assembly.
Install the 2 screws.
Engage the claw and 2 pins to install the steering pad switch assembly (LH side) to the steering wheel sub-assembly.
Install the 2 screws.
Connect the steering pad switch connector to the spiral cable sub-assembly.
![]() |
Pass the wire harness over the 2 guides.
| 2. INSTALL HORN BUTTON ASSEMBLY |