Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY

LICENSE PLATE LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL LICENSE PLATE LIGHT PACKING
  1. Install a new license plate light packing.



2. INSTALL LICENSE PLATE LIGHT ASSEMBLY
  1. Engage the 2 claws to install the license plate light assembly.

  1. Connect the connector.



3. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
(Click here)