LUMBAR SWITCH > REMOVAL |
| 1. REMOVE FRONT POWER SEAT SWITCH (for TMMK Made) |
| 2. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for TMMK Made) |
![]() |
Disconnect the connector to remove the front lumbar power seat switch.
| 3. REMOVE FRONT SEAT ASSEMBLY (for SIA Made) |
| 4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (for SIA Made) |
![]() |
Disconnect the rubber band of the separate type front seatback cover.
| 5. REMOVE NO. 1 FRONT SEAT INNER CUSHION SHIELD (for SIA Made) |
![]() |
Remove the screw.
Disengage the 2 claws to remove the clip from the front No. 1 seat inner cushion shield as shown in the illustration.
![]() |
Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.
| 6. REMOVE FRONT SEAT CUSHION SHIELD (for SIA Made) |
![]() |
Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.
![]() |
Disengage the 2 claws and open the wire harness cover.
| *1 | Wire Harness Cover |
Remove the wire harness from the wire harness cover.
Disengage the 2 wire harness clamps.
Disconnect the front power seat switch connector.
![]() |
Disconnect the front lumbar power seat switch connector.
| 7. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for SIA Made) |
![]() |
Disengage the 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.