DTC C1A45 Vehicle Speed Sensor |
| DTC No. | DTC Detection Condition | Trouble Area |
| C1A45 | A fail flag is transmitted from the skid control ECU. |
|
| 1.CHECK OTHER DTC OUTPUT (VEHICLE STABILITY CONTROL SYSTEM) |
Check for DTCs of the vehicle stability control system (Click here).
|
| ||||
| OK | |
| 2.CHECK DTC |
Clear the DTCs (Click here).
Recheck for DTCs and check if the same DTC is output again.
| Result | Proceed to |
| No DTC is output | A |
| DTC is output from the blind spot monitor sensor RH (Master) | B |
| DTC is output from the blind spot monitor sensor LH (Slave) | C |
|
| ||||
|
| ||||
| A | ||
| ||