Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)

FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Seat)


  1. for TMMK Made:



      B271078E01
    1. Install the front seat inner belt assembly LH with the nut.
      Text in Illustration 
      *1
      Protruding Part

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

      NOTICE:
      Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.

    2. Engage the clamp.

    3. Engage each clamp under the front seat assembly.



  1. for SIA Made:



      B279407E01
    1. Install the front seat inner belt assembly LH with the nut.
      Text in Illustration 
      *1
      Protruding Part

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

      NOTICE:
      Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.

    2. Engage the clamp.

    3. Engage each clamp under the front seat assembly.



2. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Seat)


  1. for TMMK Made:



      B279409E01
    1. Install the front seat inner belt assembly RH with the nut.
      Text in Illustration 
      *1
      Protruding Part
      *2
      Limit Switch

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

      NOTICE:
      Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster.

    2. Connect the limit switch with the screw.

    3. Connect the connector.



  1. for SIA Made:



      B279413E01
    1. Install the front seat inner belt assembly RH with the nut.
      Text in Illustration 
      *1
      Protruding Part
      *2
      Limit Switch

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

      NOTICE:
      Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster.

    2. Connect the limit switch with the screw.

    3. Engage each clamp under the front seat assembly.



3. INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Seat)
for TMMK Made:
for SIA Made:


4. INSTALL FRONT SEAT ASSEMBLY
for TMMK Made: (Click here)
for SIA Made: (Click here)