DOOR CONTROL RECEIVER > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE REAR SEAT CUSHION ASSEMBLY |
Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.
![]() |
Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to disengage the hook.
| a | 100 mm (3.94 in.) or less |
Repeat the step above for the other hook.
Remove the rear seat cushion assembly.
| 4. REMOVE REAR SEAT CUSHION LOCK HOOK |
![]() |
Disengage the claw and remove the rear seat cushion lock hook.
| 5. REMOVE REAR SIDE SEATBACK ASSEMBLY RH |
Disconnect the rear seat outer belt from the rear seat shoulder belt guide.
Disconnect the connector.
![]() |
Remove the 2 bolts.
Disengage the hook and remove the rear side seatback assembly RH.
| 6. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH |
Disconnect the rear door opening trim weatherstrip RH.
| 7. REMOVE ROOF SIDE INNER GARNISH RH |
| 8. REMOVE DOOR CONTROL RECEIVER (w/o Tire Pressure Warning System) |
![]() |
Disconnect the connector.
Remove the bolt and door control receiver.
| 9. REMOVE DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY (w/ Tire Pressure Warning System) |
![]() |
Disconnect the connector.
Remove the bolt and door control and tire pressure monitoring system receiver assembly.