1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
| *1 | New O-ring |
Apply a light coat of engine oil to 4 new O-rings and install them to the 4 camshaft timing oil control valve assemblies.
Install the 4 oil control valves with the 4 bolts.
Make sure that each O-ring is not cracked or moved out of place during installation.
Connect the 4 oil control valve connectors.
82121
2.CONNECT ENGINE WIRE
Install the 2 wire harness brackets with the 2 bolts.
Connect the 3 wire harness clamps.
17190
3.INSTALL INTAKE AIR SURGE TANK ASSEMBLY