Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM2030EQ _51 Engine / Hybrid System _014634 2GR-FE ENGINE CONTROL _0074395 CAMSHAFT OIL CONTROL VALVE A

2GR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  REMOVAL  


PROCEDURE

Hide 17190 1.REMOVE INTAKE AIR SURGE TANK ASSEMBLY

Hide 82121 2.DISCONNECT ENGINE WIRE

a.
A293825
0.146,0.177 0.458,0.333 0.313,0.156 10 *a 0.229,2.521 0.542,2.677 0.313,0.156 10 *b
*a for Bank 2
*b for Bank 1


Disconnect the 3 wire harness clamps.


b.

Remove the 2 bolts and 2 wire harness brackets.


Hide 3.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Disconnect the 4 oil control valve connectors.


b.
A293826
1.646,0.76 1.958,0.917 0.313,0.156 10 *a 1.708,1.354 2.021,1.51 0.313,0.156 10 *b 0.073,0.073 0.385,0.229 0.313,0.156 10 *c 0.125,2.49 0.438,2.646 0.313,0.156 10 *d 2.021,2.854 2.333,3.01 0.313,0.156 10 *a 2.104,3.156 2.417,3.313 0.313,0.156 10 *b
*a for Intake Side
*b for Exhaust Side
*c for Bank 2
*d for Bank 1


Remove the 4 bolts and 4 oil control valves.


c.
A090053
1.573,0.938 1.094,0.583 false 0.906,0.479 1.094,0.667 0.188,0.188 10 *1
*1 O-ring


Remove the O-ring from each oil control valve.