Home › Drivetrain › U660E AUTOMATIC TRANSMISSION / TRANSAXLE › OIL PUMP
RM2030EQ _52 Drivetrain _014643 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0074475 OIL PUMP A

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  OIL PUMP  DISASSEMBLY  


PROCEDURE

Hide 35035 1.INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY

Hide 35370 2.REMOVE STATOR SHAFT ASSEMBLY

a.
C138275

Using a "TORX" socket wrench (T30), remove the 16 bolts and stator shaft assembly from the front oil pump body sub-assembly.

NOTICE:

Keep the gears in the order they were removed.



Hide 35035 3.INSPECT CLEARANCE OF FRONT OIL PUMP AND GEAR BODY SUB-ASSEMBLY

Hide 35301B 4.REMOVE FRONT OIL PUMP BODY O-RING

a.
C138278

Remove the front oil pump body O-ring from the front oil pump body sub-assembly.


Hide 35321 5.REMOVE FRONT OIL PUMP DRIVE GEAR

a.
C138276

Remove the front oil pump drive gear from the front oil pump body sub-assembly.


Hide 35322 6.REMOVE FRONT OIL PUMP DRIVEN GEAR

a.
C138277

Remove the front oil pump driven gear from the front oil pump body sub-assembly.


Hide 35301A 7.REMOVE FRONT OIL PUMP OIL SEAL

a.
C197700
1.844,1.521 1.844,1.75 false 2.906,0.969 2.906,1.104 false 1.677,1.792 2,1.958 0.323,0.167 10 false SST 2.74,1.115 3.063,1.281 0.323,0.167 10 false SST

Secure the front oil pump body sub-assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Using SST, remove the front oil pump oil seal from the front oil pump body sub-assembly.

SST
09308-00010