The rear No. 2 suspension arm assembly RH can be removed directly from the vehicle.
1.REMOVE REAR WHEELS
89407C
2.REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (w/ Height Control Sensor)
48730F
3.SEPARATE REAR NO. 2 SUSPENSION ARM ASSEMBLY RH
Remove the bolt and nut, and separate the rear No. 2 suspension arm assembly RH (outer side) from the rear axle carrier sub-assembly.
When removing the bolt, keep the nut from rotating.
48730F
4.REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY RH
Remove the bolt and rear No. 2 suspension arm assembly RH from the rear suspension member sub-assembly.
51206A
5.REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY
48740F
6.REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY LH
Remove the bolt and rear No. 2 suspension arm assembly LH from the rear suspension member sub-assembly.
48720A
7.REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY LH
Remove the bolt and rear No. 1 suspension arm assembly LH from the rear suspension member sub-assembly.
48710A
8.REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY RH
Perform the same procedure as for the LH side.