Home › Steering › STEERING COLUMN › STEERING PAD SWITCH(for 4 Spoke)
RM2030EQ _55 Steering _014656 STEERING COLUMN _0074534 STEERING PAD SWITCH(for 4 Spoke) A

STEERING COLUMN  STEERING PAD SWITCH(for 4 Spoke)  INSTALLATION  


PROCEDURE

Hide 84250A 1.INSTALL STEERING PAD SWITCH ASSEMBLY

a.

Engage the claw and 2 pins to install the steering pad switch assembly (RH side) to the steering wheel sub-assembly.


b.

Install the 2 screws.

Torque:
2.4 N*m (24 kgf*cm, 21 in.*lbf)


c.

Engage the claw and 2 pins to install the steering pad switch assembly (LH side) to the steering wheel sub-assembly.


d.

Install the 2 screws.

Torque:
2.4 N*m (24 kgf*cm, 21 in.*lbf)


e.

Connect the steering pad switch connector to the spiral cable sub-assembly.


f.
C239353

Pass the wire harness over the 2 guides.


Hide 45130 2.INSTALL HORN BUTTON ASSEMBLY