1.REMOVE REAR BUMPER ASSEMBLY
89348J
2.REMOVE ULTRASONIC SENSOR CLIP
Disconnect the connector.
Disengage the clamp.
Disengage the 4 claws to remove the ultrasonic sensor clip.
89341A
3.REMOVE NO. 1 ULTRASONIC SENSOR
Disengage the 2 claws to remove the No. 1 ultrasonic sensor.
89348A
4.REMOVE NO. 2 ULTRASONIC SENSOR RETAINER
Disengage the 2 claws to remove the No. 2 ultrasonic sensor retainer from the rear bumper assembly.