Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Power Seat) › 2012.02–2013.07
RM2030EQ _58 Vehicle Interior _014670 SEAT _0074632 FRONT SEAT ASSEMBLY(for Power Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  DISASSEMBLY  


PROCEDURE

Hide 73240 1.REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

Hide 73230 2.REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

Hide 71849 3.REMOVE SEAT ADJUSTER COVER CAP

a.
B286594

Remove the 2 seat adjuster cover caps.


Hide 84921B 4.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

a.
B269607

Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.


Hide 84921A 5.REMOVE RECLINING POWER SEAT SWITCH KNOB

a.
B269611

Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.


Hide 71074S 6.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

a.
B286597

Disconnect the rubber band of the separate type front seatback cover.


Hide 71868A 7.REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD

a.
B286595

Remove the screw.


b.

Disengage the 2 claws to remove the front No. 1 seat inner cushion shield from the clip as shown in the illustration.


c.
B286596

Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.


d.
B269623

Using a clip remover, remove the clip.


Hide 71812D 8.REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)

a.
B286598

Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.


b.

w/o Seat Position Memory System:

i.
B281099
0.927,0.813 0.927,1.875 false 0.833,1.906 1.063,2.104 0.229,0.198 10 false *1
*1 Wire Harness Cover


Disengage the 2 claws and open the wire harness cover.


ii.

Remove the wire harness from the wire harness cover.


iii.

Disengage the 2 clamps.


iv.

Disconnect the connector from the front power seat switch.


v.
B281100

Disconnect the front lumbar power seat switch connector.



c.

w/ Seat Position Memory System:

i.
B269629
0.701,0.086 0.853,0.231 0.152,0.145 10 *1 1.184,1.185 1.182,0.166 1.182,0.166 0.877,0.166 false
*1 Wire Harness Cover


Disengage the 2 claws and open the wire harness cover.


ii.

Remove the wire harness from the wire harness cover.


iii.

Disengage the 2 clamps.


iv.

Disconnect the 2 connectors from the position control ECU and switch assembly.


v.
B299181

Disconnect the front lumbar power seat switch connector.



Hide 71811D 9.REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)

a.
B288592

Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.


b.
B281187
2.281,0.917 2.281,1.813 false 2.198,1.833 2.344,1.99 0.146,0.156 10 *1
*1 Wire Harness Cover


Disengage the 3 claws and open the wire harness cover.


c.

Remove the wire harness from the wire harness cover.


d.

Disengage the 2 clamps.


e.

Disconnect the front power seat switch connector.


Hide 84922C 10.REMOVE FRONT POWER SEAT SWITCH (w/o Seat Position Memory System)

Hide 84070 11.REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Seat Position Memory System)

Hide 84922A 12.REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)

Hide 71862 13.REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)

a.
B280207

Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.


Hide 71861 14.REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)

a.
B281085

Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.


Hide 15.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

a.
B281104

Disengage the fastener and separate the front seat airbag assembly wire harness.


b.

for RHD Front Passenger Side:

i.
B270300

Disengage the clamp to remove the connector as shown in the illustration.



c.
B281108

Disengage the hook.


d.
B311810
1.646,1.5 1.646,2.042 true 1.542,2.063 1.802,2.281 0.26,0.219 10 false *A
*A for Driver Side:


Disengage each hook and remove the separate type front seat cushion cover with pad.


Hide 71072S 16.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

a.
B281501

Remove the 2 hog rings.


b.
B297960

Remove the 18 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.


Hide 17.REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

a.
B281110

Remove the 5 hog rings.


b.
B270266

Open the 2 fasteners.


c.
B281113

Remove the 3 hog rings.


d.
B269654

Disengage the 4 claws and remove the 2 front seat headrest supports.


e.
B288590

Remove the 2 nuts and the 3 brackets.


f.

Remove the separate type front seatback cover with pad.


Hide 71074S 19.REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a.
B288606

Remove the 8 hog rings and separate type front seatback cover from the separate type front seatback pad.


Hide 71874 20.REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)

a.
B281120

Remove the screw.


b.

Disengage the hook as shown in the illustration.


c.

Disengage the clip and remove the front seat lower cushion shield LH.


Hide 71873 21.REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)

a.
B288608

Remove the screw.


b.

Disengage the hook as shown in the illustration.


c.

Disengage the clip and remove the front seat lower cushion shield RH.


Hide 71876G 22.REMOVE RECLINING ADJUSTER INSIDE COVER LH

a.
B281116

Disengage the 2 guides to remove the reclining adjuster inside cover LH.


Hide 71875G 23.REMOVE RECLINING ADJUSTER INSIDE COVER RH

a.
B281117

Disengage the 2 guides to remove the reclining adjuster inside cover RH.


Hide 71538B 24.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)

a.
B281180

Remove the screw.


b.

Disengage the 3 claws to remove the front seat cushion edge protector LH.


Hide 71537H 25.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)

a.
B281181

Remove the screw.


b.

Disengage the 3 claws to remove the front seat cushion edge protector RH.


Hide 71538A 26.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)

a.
B281189

Remove the screw.


b.

Disengage the 3 claws to remove the front seat cushion edge protector LH.


Hide 71537G 27.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)

a.
B281188

Remove the screw.


b.

Disengage the 3 claws to remove the front seat cushion edge protector RH.


Hide 82192 28.REMOVE FRONT SEAT WIRE

a.

Disconnect each connector and disengage each clamp to remove the front seat wire.


Hide 8219B 29.REMOVE FRONT NO. 2 SEAT WIRE

a.

Disconnect each connector and disengage each clamp to remove the front No. 2 seat wire.


Hide 71640S 30.REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY

a.
B297965

Remove the 4 bolts


b.

Disengage the 4 guides to remove the separate type front seatback spring assembly from the separate type front seat cushion spring assembly.


Hide 71587B 31.REMOVE FRONT SEATBACK EDGE PROTECTOR

a.
B337637

Disengage each claw to remove the 2 front seatback edge protectors from the front seatback frame sub-assembly.


Hide 72760D 32.REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Driver Side)

Hide 71054S 33.REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY (for Front Passenger Side)

a.
B353083

Disengage the 4 claws.


b.

Disengage the 2 guides to remove the front seatback spring sub-assembly from the front seatback frame sub-assembly.


c.

Remove the 2 front seatback hooks from the front seatback spring sub-assembly.