1.REMOVE FRONT SEAT ASSEMBLY
84921B
2.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
84921A
3.REMOVE RECLINING POWER SEAT SWITCH KNOB
71074S
4.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
71868A
5.REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD
Remove the screw.
Disengage the 2 claws to remove the front No. 1 seat inner cushion shield from the clip as shown in the illustration.
Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.
71812D
6.REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)
Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.
| *1 | Wire Harness Cover |
Disengage the 2 claws and open the wire harness cover.
Remove the wire harness from the wire harness cover.
Disengage the 2 clamps.
Disconnect the connector from the front power seat switch.
Disconnect the front lumbar power seat switch connector.
71811D
7.REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)
84922C
8.REMOVE FRONT POWER SEAT SWITCH
Remove the 3 screws and front power seat switch from the front seat cushion shield.