72760D
1.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Driver Side)
71054S
2.INSTALL FRONT SEATBACK SPRING SUB-ASSEMBLY (for Front Passenger Side)
Install the 2 front seatback hooks to the front seatback spring sub-assembly.
Engage the 2 guides to install the front seatback spring sub-assembly to the front seatback frame sub-assembly.
Engage the 4 claws.
71587B
3.INSTALL FRONT SEATBACK EDGE PROTECTOR
Engage each claw to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.
71640S
4.INSTALL SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY
Engage the 4 guides to install the separate type front seatback spring assembly to the separate type front seat cushion spring assembly.
Install the 4 bolts.
8219B
5.INSTALL FRONT NO. 2 SEAT WIRE
Connect each connector and engage each clamp to install the front No. 2 seat wire.
82192
6.INSTALL FRONT SEAT WIRE
Connect each connector and engage each clamp to install the front seat wire.
71538B
7.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)
Engage the 3 claws to install the front seat cushion edge protector LH.
Install the screw.
71537H
8.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)
Engage the 3 claws to install the front seat cushion edge protector RH.
Install the screw.
71538A
9.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)
Engage the 3 claws to install the front seat cushion edge protector LH.
Install the screw.
71537G
10.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)
Engage the 3 claws to install the front seat cushion edge protector RH.
Install the screw.
71876G
11.INSTALL RECLINING ADJUSTER INSIDE COVER LH
Engage the 2 guides to install the reclining adjuster inside cover LH.
71875G
12.INSTALL RECLINING ADJUSTER INSIDE COVER RH
Engage the 2 guides to install the reclining adjuster inside cover RH.
71874
13.INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)
Engage the clip to install the front seat lower cushion shield LH.
Engage the hook as shown in the illustration.
Install the screw.
71873
14.INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)
Engage the clip to install the front seat lower cushion shield RH.
Engage the hook as shown in the illustration.
Install the screw.
71074S
15.INSTALL SEPARATE TYPE FRONT SEATBACK COVER
Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 8 new hog rings.
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
73920A
16.INSTALL FRONT SEAT AIRBAG ASSEMBLY
17.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Temporarily install the separate type front seatback cover with pad.
Install the 3 brackets with the 2 nuts.
For vehicles with a front seat airbag assembly, the separate type front seatback cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.
Make sure that the strap is not twisted after installing the nut.
Install the bracket securely.
Engage the 4 claws to install the 2 front seat headrest supports.
Using hog ring pliers, install 3 new hog rings.
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
Close the 2 fasteners.
Using hog ring pliers, install 5 new hog rings.
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
71072S
18.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 18 new hog rings.
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
Using hog ring pliers, install 2 new hog rings.
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
19.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Temporarily install the separate type front seat cushion cover with pad.
Engage each hook.
for RHD Front Passenger Side:
Engage the clamp to install the connector as shown in the illustration.
Engage the fastener to secure the front seat airbag assembly wire harness.
71862
20.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Driver Side)
Engage the 5 claws and 6 guides to install the front seat inner cushion shield.
71861
21.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)
Engage the 5 claws and 7 guides to install the front seat inner cushion shield.
84922A
22.INSTALL FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)
84922C
23.INSTALL FRONT POWER SEAT SWITCH (w/o Seat Position Memory System)
84070
24.INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Seat Position Memory System)
71812D
25.INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side)
Connect the front lumbar power seat switch connector.
w/o Seat Position Memory System:
Connect the connector to the front power seat switch.
w/ Seat Position Memory System:
Connect the 2 connectors to the position control ECU and switch assembly.
Engage the 2 clamps.
Install the wire harness to the wire harness cover.
Engage the 2 claws to close the wire harness cover.
Engage the 4 claws, 7 guides and clip to install the front seat cushion shield.
71811D
26.INSTALL FRONT SEAT CUSHION SHIELD (for Front Passenger Side)
Connect the front power seat switch connector.
Engage the 2 clamps.
Install the wire harness to the wire harness cover.
Engage the 3 claws to close the wire harness cover.
Engage the 4 claws, 8 guides and clip to install the front seat cushion shield.
71868A
27.INSTALL FRONT NO. 1 SEAT INNER CUSHION SHIELD
Install the clip.
Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield as shown in the illustration.
Engage the 2 claws to install the front No. 1 seat inner cushion shield to the clip as shown in the illustration.
Install the screw.
71074S
28.CONNECT SEPARATE TYPE FRONT SEATBACK COVER
Connect the rubber band of the separate type front seatback cover.
84921A
29.INSTALL RECLINING POWER SEAT SWITCH KNOB
Engage the 4 claws to install the reclining power seat switch knob.
84921B
30.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
Engage the 4 claws to install the slide and vertical power seat switch knob.
71849
31.INSTALL SEAT ADJUSTER COVER CAP
Install the 2 seat adjuster cover caps.
73240
32.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)
73230
33.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)