Home › Vehicle Interior › SEAT › POWER SEAT SWITCH(w/ Seat Position Memory System)
RM2030EQ _58 Vehicle Interior _014670 SEAT _0074635 POWER SEAT SWITCH(w/ Seat Position Memory System) A

SEAT  POWER SEAT SWITCH(w/ Seat Position Memory System)  INSTALLATION  


PROCEDURE

Hide 84070 1.INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY

a.

Install the position control ECU and switch assembly to the front seat cushion shield with the 3 screws.


Hide 71812D 2.INSTALL FRONT SEAT CUSHION SHIELD

a.

Connect the connector to the front lumbar power seat switch.


b.

Connect the 2 connectors to the position control ECU and switch assembly.


c.

Engage the 2 clamps.


d.

Install the wire harness to the wire harness cover.


e.

Engage the 2 claws to close the wire harness cover.


f.

Engage the 4 claws, 7 guides and clip to install the front seat cushion shield.


Hide 71868A 3.INSTALL FRONT NO. 1 SEAT INNER CUSHION SHIELD

a.
B288586

Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield as shown in the illustration.


b.
B288587

Engage the 2 claws to install the front No. 1 seat inner cushion shield to the clip as shown in the illustration.


c.

Install the screw.


Hide 71074S 4.CONNECT SEPARATE TYPE FRONT SEATBACK COVER

Hide 84921A 5.INSTALL RECLINING POWER SEAT SWITCH KNOB

Hide 84921B 6.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB