Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD
RM2030EQ _58 Vehicle Interior _014674 INTERIOR PANELS / TRIM _0074672 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE NO. 1 INSTRUMENT PANEL PIN

a.

Remove the 4 screws <C> and 4 No. 1 instrument panel pins.

B281902


Hide 73960A 2.REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

Hide 55843A 3.REMOVE NO. 1 HEATER TO REGISTER DUCT

a.
B281903

Remove the clip.


b.

Remove the 3 screws <C> and No. 1 heater to register duct.


Hide 55845A 4.REMOVE NO. 3 HEATER TO REGISTER DUCT

a.
B281907

Remove the clip.


b.

Remove the 3 screws <C> and No. 3 heater to register duct.


Hide 55971C 5.REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

a.
B277982

Remove the screw <C>.


b.

Disengage the 2 claws to remove the No. 1 side defroster nozzle duct.


Hide 55972C 6.REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

a.
B281908

Remove the screw <C>.


b.

Disengage the 2 claws to remove the No. 2 side defroster nozzle duct.


Hide 86101 7.REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)

Hide 86101 8.REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)

Hide 55950G 9.REMOVE DEFROSTER NOZZLE ASSEMBLY

a.
B277984

Remove the 3 screws <C>.


b.

Disengage the 2 guides to remove the defroster nozzle assembly.


Hide 86860 10.REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

Hide 55844 11.REMOVE NO. 2 HEATER TO REGISTER DUCT

a.
B277985

Remove the 2 screws <C> and No. 2 heater to register duct.


Hide 55012A 12.REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

a.
B277986

Remove the 2 screws <C>.


b.

Apply protective tape to the area shown in the illustration.

B281909
2.135,1.135 2.635,0.823 false 2.667,0.667 3.063,0.927 0.396,0.26 10 false *1
*1 Protective Tape - -



c.

Disengage the 6 clips for No. 2 instrument panel garnish sub-assembly lower part as shown in the illustration.


d.

Using a moulding remover, disengage the 8 clips to remove the No. 2 instrument panel garnish sub-assembly as shown in the illustration.