Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER › 2012.02–2015.04
RM2030EQ _59 Vehicle Exterior _014682 EXTERIOR PANELS / TRIM _0074744 FRONT BUMPER A

EXTERIOR PANELS / TRIM  FRONT BUMPER  REASSEMBLY  


PROCEDURE

Hide 52536 1.INSTALL FRONT BUMPER SIDE RETAINER LH

a.
B281875

Engage the 2 claws and install the front bumper side retainer LH.


b.

Install the bolt and screw.

Torque:
Bolt : 5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 52535 2.INSTALL FRONT BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 52021 3.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

a.
B281859

Install the front bumper reinforcement sub-assembly with the 6 bolts.

Torque:
61 N*m (622 kgf*cm, 45 ft.*lbf)


b.

Engage the 5 clamps.


Hide 52611 4.INSTALL FRONT BUMPER ENERGY ABSORBER

a.
B301477

Engage the 2 guides to install the front bumper energy absorber.


Hide 52129B 5.INSTALL LOWER FRONT BUMPER COVER

a.
B281866C08
2.375,1.708 1.979,1.521 false 2.406,1.646 2.615,1.854 0.208,0.208 10 false *1
*1 Hook


Engage the hook.


b.

Engage the 2 claws to install the lower front bumper cover.


Hide 52128C 6.INSTALL FRONT BUMPER HOLE COVER LH

a.
B281864

Engage the 4 claws.


b.

Install the front bumper hole cover LH with the screw.


Hide 52127D 7.INSTALL FRONT BUMPER HOLE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 53112E 8.INSTALL NO. 1 LOWER RADIATOR GRILLE

a.
B281863

Engage the 18 claws to install the No. 1 lower radiator grille.


Hide 75310A 9.INSTALL RADIATOR GRILLE EMBLEM ASSEMBLY

a.
B281870

Engage the guide and 3 claws to install the radiator grille emblem assembly.


Hide 10.INSTALL RADIATOR GRILLE SUB-ASSEMBLY

a.
B281862

Engage the 10 claws to install the radiator grille sub-assembly.


Hide 53879H 11.INSTALL FRONT FENDER LINER RETAINER

a.
B281861

Engage the claw and install the front fender liner retainer.

HINT:

Use the same procedure for the RH side and LH side.



Hide 81220 12.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

Hide 81210A 13.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:

Use the same procedure as for the LH side.


Hide 76878A 14.INSTALL FRONT SPOILER SIDE PROTECTOR LH (w/ Front Spoiler)

a.

Clean the front spoiler.

i.

Remove any double-sided tape from the front spoiler.


ii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new front spoiler side protector LH.

i.

Remove the release paper from the front spoiler side protector LH.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



ii.
B308043

Install a new front spoiler side protector LH as shown in the illustration.



Hide 76877D 15.INSTALL FRONT SPOILER SIDE PROTECTOR RH (w/ Front Spoiler)

HINT:

Use the same procedure as for the LH side.


Hide 16.INSTALL FRONT SPOILER SUB-ASSEMBLY (w/ Front Spoiler)

a.

Engage the 17 guides, 6 claws and install the front spoiler sub-assembly.

B308047


b.

Install the 27 clips.

B308046


Hide 89348 17.INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89341A 18.INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 19.INSTALL HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)

a.
B281860

Engage the 5 clamps to install the headlight cleaner hose.


Hide 85208A 20.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

Hide 85207A 21.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:

Use the same procedure as for the LH side.


Hide 22.INSTALL HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

Hide 23.INSTALL HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:

Use the same procedure as for the LH side.


Hide 52114A 24.INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (for LHD)

a.
B315053

Install the front bumper extension mounting bracket with the 2 screws.