These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15C0 | Short in GPS Antenna | Navigation antenna error | ·
Navigation antenna cord ·
Navigation antenna assembly ·
Navigation ECU sub-assembly |
| B15C1 | Open in GPS Antenna | Error of the power source to the navigation antenna | ·
Navigation antenna cord ·
Navigation antenna assembly ·
Navigation ECU sub-assembly |
Check if the navigation antenna cord is securely connected to the navigation ECU sub-assembly.
Navigation antenna cord is securely connected.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Replace the navigation antenna assembly with a known good one and check if the same DTC is output again.
Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION ANTENNA>REMOVAL
Clear the DTCs.
Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR
Recheck for DTCs and check if the same DTC is output again.
No DTCs are output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG