Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › 2012.02–2015.04
RM2030EQ _56 Audio / Visual / Telematics _014659 NAVIGATION / MULTI INFO DISPLAY _0074553 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  Route cannot be Calculated  


PROCEDURE

1.CONFIRM SYMPTOMS
a.

Confirm the information about the situation when the route calculation did not complete.

Result:
Result Proceed to
Route cannot be calculated for any destination. A
A road in the route is closed or has not been officially opened yet. B
A ferry crossing is included in the route.
The destination is too close.
The route cannot be calculated only when driving on a bumpy road.


HINT:

A route cannot be calculated if the route is unavailable, a ferry crossing is included in the route, the destination is too close or when driving on bumpy roads.




A

2.REPLACE HARD DISK DRIVE

B

NORMAL OPERATION

2.REPLACE HARD DISK DRIVE

b.

Set another destination and check if the system can calculate the route correctly.

OK:

Route can be correctly calculated.



Result:
Proceed to
OK
NG



OK

END

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE