73240
1.REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)
for LHD: Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY(for LHD)>REMOVAL
for RHD: Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY(for RHD)>REMOVAL
73230
2.REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)
for LHD: Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY(for LHD)>REMOVAL
for RHD: Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY(for RHD)>REMOVAL
71849
3.REMOVE SEAT ADJUSTER COVER CAP
Remove the 2 seat adjuster cover caps.
84921B
4.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.
84921A
5.REMOVE RECLINING POWER SEAT SWITCH KNOB
Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.
71074S
6.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
Disconnect the rubber band of the separate type front seatback cover.
71868A
7.REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD
Remove the screw.
Disengage the 2 claws to remove the front No. 1 seat inner cushion shield from the clip as shown in the illustration.
Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.
Using a clip remover, remove the clip.
71812D
8.REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)
Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.
w/o Seat Position Memory System:
| *1 | Wire Harness Cover |
Disengage the 2 claws and open the wire harness cover.
Remove the wire harness from the wire harness cover.
Disengage the 2 clamps.
Disconnect the connector from the front power seat switch.
Disconnect the front lumbar power seat switch connector.
w/ Seat Position Memory System:
| *1 | Wire Harness Cover |
Disengage the 2 claws and open the wire harness cover.
Remove the wire harness from the wire harness cover.
Disengage the 2 clamps.
Disconnect the 2 connectors from the position control ECU and switch assembly.
Disconnect the front lumbar power seat switch connector.
71811D
9.REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)
Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.
| *1 | Wire Harness Cover |
Disengage the 3 claws and open the wire harness cover.
Remove the wire harness from the wire harness cover.
Disengage the 2 clamps.
Disconnect the front power seat switch connector.
84922C
10.REMOVE FRONT POWER SEAT SWITCH (w/o Seat Position Memory System)
84070
11.REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Seat Position Memory System)
84922A
12.REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)
71862
13.REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)
Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.
71861
14.REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)
Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.
15.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Disengage the fastener and separate the front seat airbag assembly wire harness.
for Front Passenger Side:
Disengage the clamp to remove the connector as shown in the illustration.
Disengage the hook.
| *A | for Driver Side: |
Disengage each hook and remove the separate type front seat cushion cover with pad.
71072S
16.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
Remove the 2 hog rings.
Remove the 18 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.
17.REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Remove the 5 hog rings.
Open the 2 fasteners.
Remove the 3 hog rings.
Disengage the 4 claws and remove the 2 front seat headrest supports.
Remove the 2 nuts and the 3 brackets.
Remove the separate type front seatback cover with pad.
73920A
18.REMOVE FRONT SEAT AIRBAG ASSEMBLY
71074S
19.REMOVE SEPARATE TYPE FRONT SEATBACK COVER
Remove the 8 hog rings and separate type front seatback cover from the separate type front seatback pad.
71874
20.REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)
Remove the screw.
Disengage the hook as shown in the illustration.
Disengage the clip and remove the front seat lower cushion shield LH.
71873
21.REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)
Remove the screw.
Disengage the hook as shown in the illustration.
Disengage the clip and remove the front seat lower cushion shield RH.
71876G
22.REMOVE RECLINING ADJUSTER INSIDE COVER LH
Disengage the 2 guides to remove the reclining adjuster inside cover LH.
71875G
23.REMOVE RECLINING ADJUSTER INSIDE COVER RH
Disengage the 2 guides to remove the reclining adjuster inside cover RH.
71538B
24.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)
Remove the screw.
Disengage the 3 claws to remove the front seat cushion edge protector LH.
71537H
25.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)
Remove the screw.
Disengage the 3 claws to remove the front seat cushion edge protector RH.
71538A
26.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)
Remove the screw.
Disengage the 3 claws to remove the front seat cushion edge protector LH.
71537G
27.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)
Remove the screw.
Disengage the 3 claws to remove the front seat cushion edge protector RH.
82192
28.REMOVE FRONT SEAT WIRE
Disconnect each connector and disengage each clamp to remove the front seat wire.
8219B
29.REMOVE FRONT NO. 2 SEAT WIRE
Disconnect each connector and disengage each clamp to remove the front No. 2 seat wire.
71640S
30.REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY
Remove the 4 bolts
Disengage the 4 guides to remove the separate type front seatback spring assembly from the separate type front seat cushion spring assembly.
71587B
31.REMOVE FRONT SEATBACK EDGE PROTECTOR
Disengage each claw to remove the 2 front seatback edge protectors from the front seatback frame sub-assembly.
72760D
32.REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Driver Side)
71054S
33.REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY (for Front Passenger Side)
Disengage the 4 claws.
Disengage the 2 guides to remove the front seatback spring sub-assembly from the front seatback frame sub-assembly.
Remove the 2 front seatback hooks from the front seatback spring sub-assembly.