87810
1.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)
Slide the inner rear view mirror assembly in the direction indicated by the arrow in the illustration to install it.
Confirm that the lock lever is surely installed.
Engage the 2 claws to install the inner mirror base cover.
87810
2.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)
Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.
Connect the connector.
87834
3.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)
w/o Lane Departure Alert System:
Engage the 6 claws.
Slide the inner rear view mirror stay holder cover and engage the 2 claws to install the cover as shown in the illustration.
86466
4.INSTALL NO. 1 LANE DEPARTURE WARNING CAMERA COVER (w/ EC Mirror)
w/Lane Departure Alert System:
Click hereEngine / Hybrid System>CRUISE CONTROL>LANE RECOGNITION CAMERA SENSOR>INSTALLATION
86466C
5.INSTALL NO. 2 LANE DEPARTURE WARNING CAMERA COVER (w/ EC Mirror)
w/Lane Departure Alert System:
Click hereEngine / Hybrid System>CRUISE CONTROL>LANE RECOGNITION CAMERA SENSOR>INSTALLATION