Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR › from 2015.04
RM2030EQ _53 Suspension _014647 FRONT SUSPENSION _0074493 FRONT STABILIZER BAR A

FRONT SUSPENSION  FRONT STABILIZER BAR  REMOVAL  


PROCEDURE

Hide 1.REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (When Not Using the Engine Support Bridge)

Hide 51100G 2.REMOVE FRONT FRAME ASSEMBLY (When Using the Engine Support Bridge for LHD)

Hide 48810 3.REMOVE FRONT STABILIZER LINK ASSEMBLY LH

a.
C239297

for Steel Type:

i.

Remove the nut and front stabilizer link assembly LH from the front stabilizer bar.

HINT:

If the ball joint turns together with the nut, use a hexagon wrench to hold the stud bolt.




b.
C238974

for Aluminum Type:

i.

Remove the nut and front stabilizer link assembly LH from the front stabilizer bar.

HINT:

If the ball joint turns together with the nut, use a hexagon wrench to hold the stud bolt.




Hide 48820B 4.REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Perform the same procedure as the LH side.


Hide 48829A 5.REMOVE FRONT NO. 1 STABILIZER BRACKET LH

a.
C238973

Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.


Hide 48824A 6.REMOVE FRONT NO. 1 STABILIZER BRACKET RH

HINT:

Perform the same procedure as the LH side.


Hide 48811 7.REMOVE FRONT STABILIZER BAR

a.

Remove the front stabilizer bar from the front frame assembly.


Hide 48815 8.REMOVE FRONT NO. 1 STABILIZER BAR BUSHING

a.

Remove the 2 front No. 1 stabilizer bar bushings from the front stabilizer bar.