53384B
1.REMOVE HOOD CENTER CUSHION
Disengage the 2 claws and remove the 2 hood center cushions.
75770
2.REMOVE FRONT HOOD MOULDING ASSEMBLY
53381
3.REMOVE HOOD TO RADIATOR SUPPORT SEAL
Using a clip remover, disengage the 8 clips and remove the hood to radiator support seal.
53341B
4.REMOVE HOOD INSULATOR
Using a clip remover, remove the 7 clips.
Disengage the 2 guides and remove the hood insulator.
85035
5.REMOVE WASHER NOZZLE SUB-ASSEMBLY
6.DISCONNECT WASHER HOSE ASSEMBLY
Disengage the 6 clamps and disconnect the washer hose assembly.
53450A
7.REMOVE HOOD SUPPORT ASSEMBLY LH
53440A
8.REMOVE HOOD SUPPORT ASSEMBLY RH
Use the same procedure as for the LH side.