Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › from 2015.04
RM2030EQ _56 Audio / Visual / Telematics _014659 NAVIGATION / MULTI INFO DISPLAY _0074553 NAVIGATION SYSTEM L

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL


NOTICE:
·

for LHD:

After the engine switch is turned off, the navigation receiver assembly records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

·

for RHD:

After the engine switch is turned off, the navigation receiver assembly records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 90 seconds before disconnecting the cable from the negative (-) battery terminal.

·

When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the terminal is reconnected.

System Name See Procedure
Parking Assist Monitor System (Click here)




PRECAUTIONS FOR SD CARD (DISC PLAYER DISC)


a.

The navigation system uses an SD card (disc player disc) containing data such as map data.


b.

Precaution for removing the SD card (disc player disc)

NOTICE:
·

The SD card (disc player disc) contains map data and various programs for the navigation system.

Without the SD card (disc player disc) inserted, the navigation system will not operate normally. Therefore, remove the SD card (disc player disc) only when necessary, such as when updating the map data.

·

After removing the SD card (disc player disc), do not insert any other object into the SD card (disc player disc) slot.

·

When inserting the SD card (disc player disc) into the SD card (disc player disc) slot, make sure that the SD card (disc player disc) is free of foreign matter.

·

After inserting the SD card (disc player disc), make sure that it is securely inserted into the SD card (disc player disc) slot.



i.

Before removing the SD card (disc player disc), make sure that the engine switch is turned off.



c.

Precaution for handling the SD card (disc player disc)

NOTICE:
·
E292321

Do not touch the terminals with your hand or a metal object.

·

If a strong force is applied to the SD card (disc player disc), it may be damaged.

·

Do not leave the removed SD card (disc player disc) in any of the following environments. If the SD card (disc player disc) is affected adversely, it may result in a malfunction in the navigation system.

·

Places where static electricity or electronic noise is generated.

·

Places which are hot or humid.

·

Places where the SD card (disc player disc) may be exposed to direct sunlight.

·

Places where condensation occurs.

·

Places which are prone to corrosion.


·

Do not use the SD card (disc player disc) if the label has peeled off or someone has put a sticker or other label on the SD card (disc player disc).