Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL(for RHD) › from 2015.04
RM2030EQ _54 Brake _014651 BRAKE SYSTEM (OTHER) _0074513 BRAKE PEDAL(for RHD) A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for RHD)  REMOVAL  


PROCEDURE

Hide 1.REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

HINT:

Use the same procedure for LHD and RHD.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>REMOVAL


Hide 89960 2.REMOVE HEADLAMP LEVELING ECU ASSEMBLY (w/ Automatic Headlight Beam Level Control System)

Hide 84340 3.REMOVE STOP LIGHT SWITCH ASSEMBLY

Hide 84345 4.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

Hide 47264A 5.REMOVE PUSH ROD PIN

a.
C238444

Remove the clip and push rod pin.


b.

Separate the brake master cylinder push rod clevis from the brake pedal support assembly.


Hide 47101A 6.REMOVE BRAKE PEDAL RETURN SPRING

a.
C239882

Remove the brake pedal return spring from the brake pedal support assembly.


Hide 47110 7.REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

a.
C239859

Disconnect the connector.


b.
C239860

Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.


c.
C239861

Remove the 4 nuts and brake pedal support assembly.