Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM › from 2015.04
RM2030EQ _58 Vehicle Interior _014672 HEATING / AIR CONDITIONING _0074651 AIR CONDITIONING SYSTEM D

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  DIAGNOSIS SYSTEM  


DESCRIPTION


Air conditioning system data and the Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform troubleshooting.



LIST OF OPERATION METHODS


By operating each of the air conditioning control switches as shown in the diagram below, it is possible to enter diagnostic check mode.

E236715E53
4.594,5.083 5.042,5.344 0.448,0.26 3.01,5.083 3.458,5.344 0.448,0.26 2.708,6.458 3.156,6.719 0.448,0.26 1.344,4.188 1.792,4.448 0.448,0.26 1.354,5.625 1.802,5.885 0.448,0.26 0.5,7.854 0.948,8.115 0.448,0.26 1.51,0.448 4.292,1.26 2.781,0.813 10 false Turn the ignition switch to ON while pressing the air conditioning control assembly "AUTO" switch and "Recirculation" switch simultaneously. Hold both switches until the indicator check screen appears. 4.625,1.208 6.594,1.729 1.969,0.521 10 false The "AUTO" and "Recirculation" switches are not pressed at the same time. 2.25,2.74 3.656,3.083 1.406,0.344 10 false Indicator Check (continuous operation) 2.104,4.167 3.813,4.51 1.708,0.344 10 false Sensor Check (DTC check) (continuous operation) 2.073,5.604 3.781,5.948 1.708,0.344 10 false Sensor Check (DTC check) (step operation) 4.635,5.135 5.042,5.292 0.406,0.156 10 false AUTO 3.052,5.135 3.458,5.292 0.406,0.156 10 false UP Dr 2.75,6.51 3.156,6.667 0.406,0.156 10 false UP Dr 1.438,7.188 4.406,7.406 2.969,0.219 10 false Check mode is canceled and A/C control starts 1.438,4.24 1.844,4.396 0.406,0.156 10 false OFF 1.448,5.677 1.854,5.833 0.406,0.156 10 false OFF 1,7.906 2.708,8.063 1.708,0.156 10 false : Indicates switch operation 0.719,8.333 2.365,8.49 1.646,0.156 10 false OFF: Blower fan off switch 3.104,8.333 5.656,8.49 2.552,0.156 10 false UP Dr: Driver side temperature up switch 3.104,7.906 5.656,8.063 2.552,0.156 10 false AUTO: Automatic air conditioning switch


INDICATOR CHECK


a.

Turn the ignition switch off.


b.

Turn the ignition switch to ACC and wait at least 5 seconds.


c.

Turn the ignition switch to ON while pressing the air conditioning control assembly "AUTO" switch and "Recirculation" switch simultaneously. Hold both switches until the indicator check screen appears.

E309817C01
0.167,0.135 0.51,0.427 0.344,0.292 12 false *A 3.771,0.135 4.115,0.427 0.344,0.292 12 false *B
*A for LHD *B for RHD



d.

The indicator check is automatically performed when panel diagnosis is activated. Check that the indicators light up and go off 4 times at 1 second intervals continuously.

E309818C01
0.177,0.135 0.552,0.375 0.375,0.24 12 false *A 3.76,0.156 4.135,0.396 0.375,0.24 12 false *B 2.375,1.5 2.625,1.708 0.25,0.208 10 false *a 3.51,1.531 3.885,1.771 0.375,0.24 10 false *d 2.927,1.542 3.302,1.781 0.375,0.24 10 false *d 2.604,1.854 2.979,2.094 0.375,0.24 10 false *b 2.604,2.385 2.979,2.625 0.375,0.24 10 false *c
*A for LHD *B for RHD
*a Indicator Blinking Pattern *b ON
*c OFF *d 1 sec.


HINT:
·

The sensor check automatically starts when the indicator check is completed.

·

Press the "OFF" switch to cancel check mode.





SENSOR CHECK (DTC CHECK)


a.

Start the engine and warm it up.


b.

Perform the indicator check.

HINT:

After the indicator check is completed, the system enters DTC check mode automatically.



c.

Read the DTC displayed on the display.

E309819C01
1.406,0.688 1.406,0.167 1.406,0.167 1.594,0.167 false 5.698,0.677 5.698,0.156 5.698,0.156 5.885,0.156 false 0.156,0.115 0.531,0.354 0.375,0.24 12 false *A 3.854,0.135 4.229,0.375 0.375,0.24 12 false *B 1.625,0.031 1.938,0.229 0.313,0.198 10 false *a 5.917,0.021 6.229,0.219 0.313,0.198 10 false *a
*A for LHD *B for RHD
*a Diagnostic Trouble Code (DTC) - -


NOTICE:

In sensor check mode, which is automatically entered after indicator check mode, troubleshooting may be partially performed. Be sure to perform the sensor check again.


HINT:

Refer to Diagnostic Trouble Code Chart for details of the codes.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>DIAGNOSTIC TROUBLE CODE CHART

·

When there are no problems, DTC 00 is output.

·

As an example, the illustration shows that DTC 12 is output.




d.

If the steps are difficult to read because they change automatically, press the "driver side TEMP UP" switch to display the steps one at a time so that they can be read easily. The items are displayed step by step each time the "driver side TEMP UP" switch is pressed.

E309820C01
0.198,0.125 0.573,0.365 0.375,0.24 12 false *A 3.75,0.135 4.125,0.375 0.375,0.24 12 false *B
*A for LHD *B for RHD


HINT:

Press the "OFF" switch to finish panel diagnosis.



e.

Clear DTCs

i.

During the sensor check, press the "FRONT DEF" switch and "REAR DEF" switch simultaneously.

E309821C01
0.167,0.146 0.542,0.385 0.375,0.24 12 false *A 3.781,0.156 4.156,0.396 0.375,0.24 12 false *B
*A for LHD *B for RHD