Home › Steering › STEERING COLUMN › STEERING WHEEL(for 4 Spoke) › from 2015.04
RM2030EQ _55 Steering _014656 STEERING COLUMN _0074533 STEERING WHEEL(for 4 Spoke) A

STEERING COLUMN  STEERING WHEEL(for 4 Spoke)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

Do not replace the spiral cable with sensor sub-assembly with the battery connected and the engine switch on (IG).

·

Do not rotate the spiral cable with sensor sub-assembly without the steering wheel with the battery connected and the engine switch on (IG).

·

Ensure that the steering wheel is installed and aligned straight when inspecting the steering sensor.



PROCEDURE

Hide 1.ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

Hide 45130 2.REMOVE HORN BUTTON ASSEMBLY

Hide 45100 3.REMOVE STEERING WHEEL ASSEMBLY

a.
C256920C01
0.385,0.35 0.541,0.499 0.155,0.149 10 *a 1.719,0.447 0.568,0.447 false 1.719,0.644 0.705,0.644 0.705,0.644 0.705,0.447 false
*a Matchmark


Remove the steering wheel assembly set nut.


b.

Put matchmarks on the steering wheel assembly and steering main shaft.


c.

Disconnect the connectors from the spiral cable sub-assembly.


d.
C256925C01
1.313,0.823 0.615,0.823 true 2.208,2.146 2.5,1.844 2.5,1.844 2.594,1.844 true 2.354,3.177 2.51,3.323 0.156,0.146 10 false *a 1.073,2.969 1.24,3.125 0.167,0.156 10 false *b 0.313,0.74 0.719,1.01 0.406,0.271 10 false SST 2.635,1.76 2.938,1.927 0.302,0.167 10 false SST
*a Turn
*b Hold


Using SST, remove the steering wheel assembly.

SST
09950-50013  (09951-05010, 09952-05010, 09953-05020, 09954-05070)

NOTICE:

Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.



Hide 84250A 4.REMOVE STEERING PAD SWITCH ASSEMBLY

Hide 84632 5.REMOVE CRUISE CONTROL MAIN SWITCH

Hide 84633 6.REMOVE CRUISE CONTROL SWITCH WIRE

a.

Remove the cruise control switch wire.


Hide 45713A 7.REMOVE STEERING SHAKE DAMPER

a.
C239357

Remove the 2 screws and steering shake damper from the steering wheel sub-assembly.