Home › Engine / Hybrid System › 2AR-FXE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM2040EQ _51 Engine / Hybrid System _014691 2AR-FXE ENGINE CONTROL _0074873 CAMSHAFT OIL CONTROL VALVE A

2AR-FXE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 11101J 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.
A195062
1.021,0.448 1.313,0.448 1.313,0.448 1.594,0.875 false 0.833,0.396 1.146,0.552 0.313,0.156 10 *1
*1 New O-ring


Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.


b.

Install the oil control valve with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).

·

Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.




c.

Connect the oil control valve connector.


Hide 2.INSPECT FOR OIL LEAK

Hide 12601B 3.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY