89892A
1.INSTALL BATTERY SMART UNIT
Wear insulated gloves.
| *a | Black Label |
Install the battery smart unit with the bolt.
Check color of the label.
Connect the connector.
The connector should be connected securely.
G92Q2
2.INSTALL NO. 2 HYBRID VEHICLE BATTERY SHIELD PANEL
Install the No. 2 hybrid vehicle battery shield panel with the 2 bolts and nut.
Connect the 3 wire harness clamps.
Connect the 2 connectors.
The connectors should be connected securely.
| *1 | Battery Cover Lock Striker |
| *2 | Button |
| *a | Push |
Install the battery cover lock striker, then push the button to lock it.
3.INSTALL REAR SEATBACK ASSEMBLY
Lift the rear seat back LH.
Engage the guide and claw to install the No. 2 room partition cover.
Connect the rear seat outer belt to the rear seat center shoulder belt guide.
Lift the rear seat back RH.
G3834
4.INSTALL SERVICE PLUG GRIP