Home › Engine / Hybrid System › 2AR-FXE COOLING › COOLING FAN SYSTEM
RM2040EQ _51 Engine / Hybrid System _014697 2AR-FXE COOLING _0074927 COOLING FAN SYSTEM G

2AR-FXE COOLING  COOLING FAN SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT COOLING FAN SYSTEM

a.

Connect the intelligent tester to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the tester on.


d.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Electric Cooling Fan.

Powertrain > Engine and ECT > Active Test
Tester Display
Control the Electric Cooling Fan
50004 234 16

e.

Check the operation of the cooling fans while operating them using the tester.

If the cooling fan motor does not operate, check the cooling fan circuit.

Click hereEngine / Hybrid System>2AR-FXE COOLING>COOLING FAN SYSTEM>Cooling Fan Circuit