Home › Drivetrain › P314 HYBRID TRANSMISSION / TRANSAXLE › HYBRID VEHICLE TRANSAXLE
RM2040EQ _52 Drivetrain _014701 P314 HYBRID TRANSMISSION / TRANSAXLE _0074944 HYBRID VEHICLE TRANSAXLE A

P314 HYBRID TRANSMISSION / TRANSAXLE  HYBRID VEHICLE TRANSAXLE  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

The engine assembly with hybrid vehicle transaxle assembly is very heavy. Be sure to follow the procedure described in the repair manual, or the engine lifter may suddenly drop.


PROCEDURE

Hide 1.REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

Hide 2.SEPARATE WIRE HARNESS

a.
C243593

Remove the 3 bolts and disconnect the 4 connectors, 3 clamps and wire harness from the hybrid vehicle transaxle assembly.


b.
C246724

Remove the bolt and disconnect the 3 clamps and motor cable from the hybrid vehicle transaxle assembly.


Hide 51100G 3.REMOVE FRONT FRAME ASSEMBLY

Hide 30900 4.REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY

a.

Using the transmission jack attachment, set the hybrid vehicle transaxle assembly on a transmission jack.

NOTICE:
·

Secure the hybrid vehicle transaxle assembly to the transmission jack using a suitable adapter, such as a rope or attachment.

·

To prevent the motor water jacket cover assembly from deforming, do not place any attachments onto the motor water jacket cover assembly of the hybrid vehicle transaxle assembly.

·

Hold the engine assembly with a suitable adapter, such as a rope, during the operation.




b.
C243594

Remove the 9 bolts and hybrid vehicle transaxle assembly.

NOTICE:
·

To avoid damage to the knock pins, do not pry between the hybrid vehicle transaxle assembly and the engine.

·

To prevent the splines of the damper from becoming misaligned, do not allow the transaxle to hit the damper during transaxle removal and installation.




Hide 12311A 5.REMOVE FRONT ENGINE MOUNTING BRACKET

a.
C243595

Remove the 3 bolts and front engine mounting bracket from the hybrid vehicle transaxle assembly.


Hide 33823 6.REMOVE NO. 1 TRANSMISSION CONTROL CABLE BRACKET

a.
C243596

Remove the 2 bolts and No. 1 transmission control cable bracket from the hybrid vehicle transaxle assembly.


Hide 33826A 7.REMOVE NO. 2 TRANSMISSION CONTROL CABLE BRACKET

a.
C243597

Remove the bolt and No. 2 transmission control cable bracket from the hybrid vehicle transaxle assembly.


Hide 33827 8.REMOVE NO. 3 TRANSMISSION CONTROL CABLE BRACKET

a.
C243598

Remove the bolt and No. 3 transmission control cable bracket from the hybrid vehicle transaxle assembly.


Hide 35151J 9.REMOVE AUTOMATIC TRANSMISSION CASE COVER

a.
C243599

Disengage the 2 guides and remove the automatic transmission case cover.


Hide 35153C 10.REMOVE NO. 3 AUTOMATIC TRANSMISSION CASE COVER

a.
C243600

Remove the 2 bolts, clip and No. 3 automatic transmission case cover from the hybrid vehicle transaxle assembly.


Hide 39195 11.REMOVE HYBRID TRANSAXLE MASS DAMPER

a.
C245029

Remove the hybrid transaxle mass damper and gasket from the hybrid vehicle transaxle assembly.


Hide 12.REMOVE WIRE HARNESS CLAMP BRACKET

a.
C243602

Remove the 3 bolts and 2 wire harness clamp brackets from the hybrid vehicle transaxle assembly.


Hide G90A0A 13.REMOVE NO. 1 INVERTER COOLING HOSE ASSEMBLY

a.
C243601

Remove the No. 1 inverter cooling hose assembly from the hybrid vehicle transaxle assembly.


Hide 14.REMOVE WITH HEAD STRAIGHT SCREW PLUG

HINT:

Perform this procedure only when replacement of the with head straight screw plug is necessary.


a.
C270622

Using a 10 mm hexagon socket wrench, remove the with head straight screw plug and O-ring from the hybrid vehicle transaxle assembly.