Home › Suspension › REAR SUSPENSION › REAR STABILIZER BAR
RM2040EQ _53 Suspension _014706 REAR SUSPENSION _0074974 REAR STABILIZER BAR A

REAR SUSPENSION  REAR STABILIZER BAR  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR WHEELS

Hide 58399B 2.REMOVE NO. 2 FLOOR UNDER COVER

Hide 58398H 3.REMOVE NO. 1 FLOOR UNDER COVER

Hide 48840A 4.REMOVE REAR STABILIZER LINK ASSEMBLY LH

a.
C239069

Remove the nut and separate the rear stabilizer link assembly LH from the rear shock absorber assembly.

If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.


b.
C241264

Remove the nut and rear stabilizer link assembly LH from the rear stabilizer bar.

If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.


Hide 48830D 5.REMOVE REAR STABILIZER LINK ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.


Hide 48812 6.REMOVE REAR STABILIZER BAR

a.
C240548

Remove the 4 bolts, rear stabilizer bar, 2 rear No. 1 stabilizer bar brackets and 2 rear stabilizer bushings.


Hide 48832A 7.REMOVE REAR NO. 1 STABILIZER BAR BRACKET

a.

Remove the 2 rear No. 1 stabilizer bar brackets from the rear stabilizer bar.


Hide 48818 8.REMOVE REAR STABILIZER BUSHING

a.

Remove the 2 rear stabilizer bushings from the rear stabilizer bar.