Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL › 2012.02–2015.04
RM2040EQ _54 Brake _014709 BRAKE SYSTEM (OTHER) _0074987 BRAKE PEDAL A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL  REMOVAL  


PROCEDURE

Hide 1.REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

Hide 89510D 2.REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY

Hide 89940 3.REMOVE AFS ECU (w/ Automatic High Beam System)

Hide 84340 4.REMOVE STOP LIGHT SWITCH ASSEMBLY

Hide 84345 5.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

Hide 47264A 6.REMOVE PUSH ROD PIN

a.
C243045

Remove the clip and push rod pin.


b.

Separate the brake master cylinder push rod clevis from the brake pedal support assembly.


Hide 47101A 7.REMOVE BRAKE PEDAL RETURN SPRING

a.
C243047

Remove the brake pedal return spring from the brake pedal support assembly.


Hide 8.REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

a.
C249088

Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.


b.
C242729

Disengage the clamp and separate the wire harness from the brake pedal support assembly.


c.
C249087

Remove the 4 nuts and brake pedal support assembly.