The power steering ECU assembly receives signals from the power management control ECU and brake booster with master cylinder assembly via the CAN communication system.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Return-to-normal Condition |
|---|---|---|---|---|---|
| U0129/42 | Lost Communication with Brake System Control Module | Lost communication with brake booster with master cylinder assembly | ·
CAN communication system ·
Brake booster with master cylinder assembly |
EPS Warning Light: Comes on | Power switch on (IG) again |
| U0293/41 | Lost Communication with Hybrid Control Module | Lost communication with power management control ECU | ·
CAN communication system ·
Power management control ECU |
EPS Warning Light: Comes on | Power switch on (IG) again |
Go to CAN Communication System.
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT