This code is stored when a power management control ECU that is incompatible with the engine immobiliser system is installed to the vehicle.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B279C | Theft Deterrent System Presence Detection | A power management control ECU that is incompatible with the engine immobiliser system is installed (1 trip detection logic*). | Power management control ECU | DTC Output Confirmation Operation
Check for DTCs. |
*: Only output while a malfunction is present.
| Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
|---|---|
| Hybrid control system cannot be started | - |
| DTC Code | Data List and Active Test |
|---|---|
| B279C | - |
Replace the current power management control ECU with the proper power management control ECU.
Click hereEngine / Hybrid System>2AR-FXE ENGINE CONTROL>ECM>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT