Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT SEAT SIDE AIRBAG ASSEMBLY
RM2040EQ _58 Vehicle Interior _014727 SUPPLEMENTAL RESTRAINT SYSTEMS _0075083 FRONT SEAT SIDE AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT SEAT SIDE AIRBAG ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 73910A 1.INSTALL FRONT SEAT AIRBAG ASSEMBLY

CAUTION:
·

The nuts must not be reused.

·

Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.



a.

Install the front seat airbag assembly with 2 new nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.

Engage the 2 clamps.


c.

Engage the claw and 3 clamps to connect the airbag wire harness.


Hide 2.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat)

Hide 3.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat)

Hide 4.INSTALL AIRBAG WIRE HARNESS

a.

Engage the fastener to secure the airbag wire harness.


b.

Connect the rubber band of the separate type front seatback cover with pad.