84070
1.INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY
Install the position control ECU and switch assembly to the front seat cushion shield RH with the 3 screws.
71811D
2.INSTALL FRONT SEAT CUSHION SHIELD RH
Connect the front lumbar power seat switch connector.
Connect the 2 connectors to the position control ECU and switch assembly.
Engage the 2 clamps.
Install the wire harness to the wire harness cover.
Engage the 2 claws to close the wire harness cover.
Engage the 4 claws, 7 guides and clip to install the front seat cushion shield RH.
71867A
3.INSTALL FRONT NO. 1 SEAT INNER CUSHION SHIELD RH
71074S
4.CONNECT SEPARATE TYPE FRONT SEATBACK COVER
84921A
5.INSTALL RECLINING POWER SEAT SWITCH KNOB
84921B
6.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
7.INSTALL FRONT SEAT ASSEMBLY RH