Home › Vehicle Interior › SEAT › POWER SEAT SWITCH(w/o Seat Position Memory System)
RM2040EQ _58 Vehicle Interior _014728 SEAT _0075093 POWER SEAT SWITCH(w/o Seat Position Memory System) A

SEAT  POWER SEAT SWITCH(w/o Seat Position Memory System)  REMOVAL  


PROCEDURE

Hide 84921B 2.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

Hide 84921A 3.REMOVE RECLINING POWER SEAT SWITCH KNOB

Hide 71074S 4.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

Hide 71867A 5.REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD

a.
B286515

Remove the screw.


b.

Disengage the 2 claws to remove the front No. 1 seat inner cushion shield from the clip as shown in the illustration.


c.
B286516

Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.


Hide 71811D 6.REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)

a.
B286519

Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.


b.
B286520
2.427,0.875 2.427,1.74 false 2.354,1.74 2.594,2.01 0.24,0.271 10 false *1
*1 Wire Harness Cover


Disengage the 2 claws and open the wire harness cover.


c.

Remove the wire harness from the wire harness cover.


d.

Disengage the 2 clamps.


e.

Disconnect the connector from the front power seat switch.


f.
B286521

Disconnect the front lumbar power seat switch connector.


Hide 71812D 7.REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)

Hide 84922B 8.REMOVE FRONT POWER SEAT SWITCH

a.
B286551

Remove the 3 screws and front power seat switch from the front seat cushion shield.