71512S
1.INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)
Using hog ring pliers, install the occupant detection sensor (separate type front seat cushion pad) to the separate type front seat cushion cover with 18 new hog rings.
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
Using hog ring pliers, install 2 new hog rings.
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
2.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
3.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REASSEMBLY
73240
4.INSTALL FRONT SEAT INNER BELT ASSEMBLY
71862
5.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
71812D
6.INSTALL FRONT SEAT CUSHION SHIELD (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
71074S
7.CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
72526A
8.INSTALL RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
9.INSTALL FRONT SEAT ASSEMBLY LH (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>INSTALLATION
71862
10.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Power Seat)
71812D
11.INSTALL FRONT SEAT CUSHION SHIELD (for Power Seat)
71868A
12.INSTALL FRONT NO. 1 SEAT INNER CUSHION SHIELD (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REASSEMBLY
71074S
13.CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REASSEMBLY
84921A
14.INSTALL RECLINING POWER SEAT SWITCH KNOB (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REASSEMBLY
84921B
15.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REASSEMBLY
16.INSTALL FRONT SEAT ASSEMBLY LH (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>INSTALLATION