1.REMOVE RADIATOR GRILLE SUB-ASSEMBLY
2.REMOVE FRONT WHEEL RH
53851Z
3.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
53875A
4.REMOVE FRONT FENDER LINER RH
67913
5.REMOVE FRONT DOOR SCUFF PLATE RH
62111A
6.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
53601
7.DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
53601
8.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.
53510
9.REMOVE HOOD LOCK ASSEMBLY
| *1 | Protective Tape |
Using a screwdriver, remove the hood lock nut cap.
Tape the screwdriver tip before use.
Disconnect the connector.
| *1 | Hood Lock Bolt |
Remove the 2 bolts and hood lock bolt.
Disconnect the hood lock control cable assembly and remove the hood lock assembly.
53630
10.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
Using a screwdriver, disengage the 4 clamps and hood cable grommet as shown in the illustration.
| *1 | Hood Lock Control Cable | *2 | Hood Cable Grommet |
| *3 | Washer Hose | *4 | Hood Lock Control Cable Clamp |
Tape the screwdriver tip before use.
Pull the hood lock control cable assembly from the engine compartment and remove it.