Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR GLASS
RM2040EQ _59 Vehicle Exterior _014736 MIRROR (EXT) _0075161 OUTER REAR VIEW MIRROR GLASS G

MIRROR (EXT)  OUTER REAR VIEW MIRROR GLASS  INSPECTION  


PROCEDURE

Hide 87931 1.INSPECT OUTER MIRROR RH


b.

Check that the outer rear view mirror indicator turn on.

NOTICE:

Do not apply a voltage of more than 6 V.


i.

Connect 4 new 1.5 V dry-cell batteries in series.


ii.
E233737C06
1.583,1.271 1.583,0.677 false 1.583,0.677 1.833,0.677 false 1.76,1.292 1.76,1.771 false 1.76,1.771 1.958,1.771 false 0.083,0.052 0.51,0.49 0.427,0.438 10 false *a 1.875,0.594 2.229,0.885 0.354,0.292 10 false + 2.01,1.677 2.396,1.99 0.385,0.313 10 false -
*a Component without harness connected
(Outer rear view mirror RH)


Apply 6 V battery voltage to the terminals of the connector, and check that the outer rear view mirror indicator comes on.

OK:
Connection Specified Condition
6 V battery positive (+) → Terminal 1 (+)
6 V battery negative (-) → Terminal 2 (-)
Indicator turns on


If the result is not as specified, replace the outer mirror RH.



Hide 87961 2.INSPECT OUTER MIRROR LH


b.

Check that the outer rear view mirror indicator turn on.

NOTICE:

Do not apply a voltage of more than 6 V.


i.

Connect 4 new 1.5 V dry-cell batteries in series.


ii.
E233737C07
1.583,1.271 1.583,0.677 false 1.583,0.677 1.833,0.677 false 1.76,1.292 1.76,1.771 false 1.76,1.771 1.958,1.771 false 0.083,0.052 0.531,0.385 0.448,0.333 10 false *a 1.875,0.594 2.302,0.969 0.427,0.375 10 false + 2.01,1.677 2.469,1.948 0.458,0.271 10 false -
*a Component without harness connected
(Outer rear view mirror LH)


Apply 6 V battery voltage to the terminals of the connector, and check that the outer rear view mirror indicator comes on.

OK:
Connection Specified Condition
6 V battery positive (+) → Terminal 1 (+)
6 V battery negative (-) → Terminal 2 (-)
Indicator turns on


If the result is not as specified, replace the outer mirror LH.