Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › 2012.02–2015.04
RM2040EQ _59 Vehicle Exterior _014738 LIGHTING (EXT) _0075174 AUTOMATIC HIGH BEAM SYSTEM C

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  U0073  Control Module Communication Bus Off  U0101  Lost Communication with TCM  U0126  Lost Communication with Steering Angle Sensor Module  U0129  Lost Communication with Skid Control ECU  U0142  Lost Communication with Main Body ECU  U0151  Lost Communication with Restraints Control Module  U0293  Lost Communication with HV ECU  


DESCRIPTION

These DTCs are stored when the CAN communication system is malfunctioning.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0073 Control Module Communication Bus Off Control module communication bus off CAN communication system
U0101 Lost Communication with TCM Lost communication with TCM CAN communication system
U0126 Lost Communication with Steering Angle Sensor Module Lost communication with steering angle sensor CAN communication system
U0129 Lost Communication with Skid Control ECU Lost communication with skid control ECU CAN communication system
U0142 Lost Communication with Main Body ECU Lost communication with main body ECU (multiplex network body ECU) CAN communication system
U0151 Lost Communication with Restraints Control Module Lost communication with restraints control module CAN communication system
U0293 Lost Communication with HV ECU Lost Communication with HV ECU CAN communication system

PROCEDURE

1.CHECK FOR DTC
a.

Clear the DTCs.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR

Body Electrical > Main Body > Clear DTCs
50002 123
Body Electrical > AFS > Clear DTCs
50002 165

b.

Check for DTCs.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR

Body Electrical > Main Body > Trouble Codes
50001 123
Body Electrical > AFS > Trouble Codes
50001 165
OK:

DTCs are not output.



Result:
Proceed to
OK
NG



OK

NG